Fuel-oxidizer mixtures: a lab and field study

ABSTRACT

Improvised explosive may be as primitive as a fuel and oxidizer mixture; yet not all fuel-oxidizer mixtures are explosive. Predicting explosive potential from laboratory-scale tests is desirable to screen a large matrix of potential threats in varying concentrations. Herein the properties of various fuel/oxidizer mixtures were measured at small scale (2 g) with bomb calorimetry and on large scale (5 kg) with high speed photography for detonation velocity and with piezoelectric pressure probes for TNT air blast equivalence. Potassium nitrate (KN), potassium chlorate (KC), potassium permanganate (KMnO₄), potassium iodate (KIO₃), ammonium nitrate (AN), and ammonium perchlorate (AP) were prepared with sucrose (Su) and aluminum (Al) fuel. Results were compared to each other as well as predictions from Cheetah thermochemical code.     

多分量力组合加载校准装置主机结构的技术实现

主要介绍了可实现六个分量力和力矩独立或组合加载的校准装置主机结构的设计思路和具体组成。针对该装置量程宽、空间大、准确度高等特点,文章分析了装置研制过程中涉及的技术难点;围绕多分量力组合加载的实现问题,说明了多分量力组合加载的方法原理设计及加载装置主机的机械结构设计等技术问题;最后说明了校准装置实现的技术性能和试验验证情况。     

煤矿型水胶炸药存储稳定性能测试

为确定煤矿型水胶炸药在储存过程中受到环境因素影响,是否会对煤矿型水胶炸药的安全稳定性能产生影响,特进行本次试验。试验采用小样本升降法得出半数引火量来确定炸药的可燃气安全值从而得出水胶炸药受到环境影响程度。试验结果表明:煤矿型水胶炸药在煤矿环境存储过程中的安全性可达400g以上,为水胶炸药的储存稳定性提供了理论依据。     

高准确度静态质量法液体流量标准装置及其不确定度评价

本文介绍了一种高准确度质量法液体流量标准装置的设计方法,为对市场中出现的高准确度科里奥利质量流量计的量值传递提供了可能。文中介绍了装置设计过程中,为提高装置准确度用到的电动换向、衡器自校准、蒸馏水代替自来水等方法。试验证明,上述方法的应用使装置达到了预期的不确定度水平。文章还着重介绍了高准确度静态质量法液体流量标准装置不确定度的评价要点,对装置的不确定度水平进行了评定。     

Facile synthesis of the desired red phosphor Li2Ca2Mg2Si2N6:Eu2+ for high CRI white LEDs and plant growth LED device

The red emission with suitable peak wavelength and narrow band is acutely required for high color rendering index (CRI) white LEDs without at the cost of the luminous efficacy. Herein, the Li₂Ca₂Mg₂Si₂N₆:Eu²⁺ red phosphor was prepared with facile solid-state method using Ca₃N₂, Mg₃N₂, Si₃N₄, Li₃N, and Eu₂O₃ as the safety raw materials under atmospheric pressure for the first time, which shows red emission peaking at 638 nm with full width at half maximum (FWHM) of 62 nm under blue light irradiation and becomes the desired red phosphor to realize the balance between luminous efficacy and high CRI in white LEDs. The morphology, structure, luminescence properties, thermal quenching behavior, and chromaticity stability of the Li₂Ca₂Mg₂Si₂N₆:Eu²⁺ phosphor are investigated in detail. Concentration quenching occurs when the Eu²⁺ content exceeds 1.0 mol%, whereas high-temperature photoluminescent measurements show a 32% drop from the room-temperature efficiency at 423 K. In view of the excellent luminescence performances of Li₂Ca₂Mg₂Si₂N₆:Eu²⁺ phosphor, a white LEDs with CRI of 91 as a proof-of-concept experiment was fabricated by coating the title phosphor with Y₃Al₅O₁₂:Ce³⁺ on a blue LED chip. In addition, the potential application of the title phosphor in plant growth LED device was also demonstrated. All the results indicate that Li₂Ca₂Mg₂Si₂N₆:Eu²⁺ is a promising red-emitting phosphor for blue LED-based high CRI white LEDs and plant growth lighting sources.     

高低温循环及对称冲击耦合加载下 炸药的安全性研究

基于一级轻气炮加载装置，研究了高低温循环及对称冲击耦合加载下某黑索今(RDX)基含Al炸药的安全性，计算了缺陷处的内能等参数。结果表明:高低温循环后，炸药试样出现可见的孔隙。对称碰撞加载后，不经高低温循环的试样未发生点火，应力加载峰值为835 MPa，加载时间为35 μs；而经历高低温循环的试样出现点火，点火前应力为242 MPa，加载时间11 μs。高低温循环所产生的缺陷是导致炸药点火的重要原因。     

A 340-GHz thin film polarisation converter

This paper introduces a 340-GHz polarisation converter. The polarisation converter consists of a bilayer metamaterial, which is processed by the flexible thin film lithography method. Two-dimensional metamaterial offer such advantages over traditional quarter-wave-plates as compactness, low profile and simple fabrication process, but the insertion loss is comparably high. In order to lower the insertion loss, the 10-μm ultrathin polyimide substrate and a bilayer structure separated by a quarter wavelength air impedance match layer are adopted. After the horn antenna’s far-field test by vector network analyser and the Gaussian beam test based on Terahertz time-domain spectroscopy (THz-TDS), the results show that in the band of 325–350 GHz, the transmission loss is less than 2 dB, and the axial ratio is less than 3 dB; besides, simulation and test insertion loss performance difference is less than 1 dB, which indicates that the method we adopt is effective. In addition, based on transmission line theory, we analyse its working principle and the influence from the fabrication error.     

Comparison of throttle devices to measure two-phase flowrates of wet gas with extremely-low liquid loading

The online measurement of wet gas with extremely-low liquid loading (Lockhart-Martinelli parameter lower than 0.02) remains a challenge. In this study, three types of throttle devices, Venturi, orifice plate and cone, are compared experimentally with air-water two-phase flow in a horizontal pipe of inner diameter of 50 mm. High-precision correlations are established to measure the gas and liquid flowrates via a single throttle device. Results show that the two-phase mass flow coefficient (K) of the three throttle devices all increase linearly with the liquid densiometric Froude number and the K correlations are established respectively to correct the gas mass flowrate deviation. The pressure loss ratio (δ) for Venturi is sensitive and monotonous to the liquid loading, which contributes to the high accuracy of liquid flowrate measurement. By incorporating the K correlations, both the gas and liquid mass flowrates can be predicted precisely. The relative error of the gas mass flowrate predicted by the Venturi is within ±2.0% at 95% confidence level, and that of the liquid mass flowrate is within ±15% at 90% confidence level.     

SC15/182F分体式电驱梭车的研制及应用

梭车是短壁机械化开采技术的重要运输设备。简要介绍了现有梭车的现状及应用局限,详细阐述了分体梭车的主要设计思路,重点介绍了薄壁分体式机架的结构特征,阐述了分体梭车在模块化卷电缆装置、四象限变频驱动等方面的技术升级,并介绍了分体梭车在国内矿区的应用情况。     

数字化射线检测技术在船舶领域的应用

随着数字射线检测技术的不断发展,CR与DR数字射线检测技术以其检测灵敏度高、检测速度快及底片数据电子化存储等优势越来越广泛地应用于各行业中。针对船舶行业射线检测的主要检测对象(钢板对接焊缝、管路对接焊缝),开展了CR数字射线检测技术等价性评价、典型裂纹试验,以及基于不同种类射线装置的DR数字射线检测工艺试验,验证了数字化射线检测技术在船舶领域应用的适用性。